This is the Hot Racing Monster Blower clip-on universal heat sink and fan for the 1/8 Arrma Kraton BLX, Notorious BLX, Outcast BLX, Senton BLX, Talion BLX, and Typhon BLX or custom projects.
FEATURES:
- Forced airflow over motor heat sink to increase cooling for improved efficiency and performance - Large 50x50x11mm 7-blade fan - Clip-on design for simple installation - Black and Blue anodized aluminum heat sink provides efficient heat transfer - Adapter with EC5 - 12AWG and 24 AWG silicone wire
YOU WILL RECEIVE:
- One (1) clip-on heat sink with fan - One (1) EC5-style adapter connector
REQUIREMENTS:
- Installation - Recommended to loosen fan screws during installation, then tighten again after installation. This will help minimize tweaking and binding the fan. - Medium strength thread lock (blue threadlocking compound) on fan mount screws - Ensure fan blades are protected - This system uses a EC-5 Connector. If your system uses another type of connector, you'll have to switch connectors, or use an adapter.
SPECIFICATIONS:
- Fan Size: 50x50x11mm - Input Voltage: 11.1V (12V max) - Fits motors with a can diameter of 1.6 inches (40mm)
COMMENTS:
- If you are using single 6 cell pack please order AON505F02 - Replacement Hot Racing 50x50x11mm fan is MH505F - Please Note some picture might show it had XT90 plug but they all have updated to EC5 plug SN January 30, 2019
FEATURES:
- Forced airflow over motor heat sink to increase cooling for improved efficiency and performance - Large 50x50x11mm 7-blade fan - Clip-on design for simple installation - Black and Blue anodized aluminum heat sink provides efficient heat transfer - Adapter with EC5 - 12AWG and 24 AWG silicone wire
YOU WILL RECEIVE:
- One (1) clip-on heat sink with fan - One (1) EC5-style adapter connector
REQUIREMENTS:
- Installation - Recommended to loosen fan screws during installation, then tighten again after installation. This will help minimize tweaking and binding the fan. - Medium strength thread lock (blue threadlocking compound) on fan mount screws - Ensure fan blades are protected - This system uses a EC-5 Connector. If your system uses another type of connector, you'll have to switch connectors, or use an adapter.
SPECIFICATIONS:
- Fan Size: 50x50x11mm - Input Voltage: 11.1V (12V max) - Fits motors with a can diameter of 1.6 inches (40mm)
COMMENTS:
- If you are using single 6 cell pack please order AON505F02 - Replacement Hot Racing 50x50x11mm fan is MH505F - Please Note some picture might show it had XT90 plug but they all have updated to EC5 plug SN January 30, 2019
