Hot Racing light weight hardened steel 18T/56T 32 pitch pinion and spur gear set for the TRA Bandit, Rustler, 2WD Slash, and 2WD Stampede
FEATURES:
- CNC machined and lightened hardened steel construction - Replaces stock nylon spur gear - Rugged 0.8 Module/32pitch teeth for total reliability on brushless power - Aluminum pinion sleeve to allow for either 1/8 inch or 5mm motor shafts - Black oxide coated gear for durability and corrosion resistance - Purple anodized countersunk aluminum washers - High strength hardware
YOU WILL RECEIVE:
- One (1) 18 tooth 32 pitch (0.8 Mod) pinion gear - One (1) 56 tooth 32 pitch (0.8 Mod) spur gear - Three (3) mounting screws - Three (3) purple anodized countersunk washers - One (1) pinion adapter sleeve - Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate)
SPECIFICATIONS:
- Number of Teeth: 18T/56T - Gear Pitch: 32 pitch (0.8 module) - Mounting Holes: 3 - Tooth Face width: ~5mm
COMMENTS:
- Consider using Hot Racing motor lock plate TE18L06 for secure motor mounting - Motor should no way exceed 180F. ESC should not exceed 160F. Excessive temperatures will shorten the life of the motor and ESC. SN July 19, 2017
FEATURES:
- CNC machined and lightened hardened steel construction - Replaces stock nylon spur gear - Rugged 0.8 Module/32pitch teeth for total reliability on brushless power - Aluminum pinion sleeve to allow for either 1/8 inch or 5mm motor shafts - Black oxide coated gear for durability and corrosion resistance - Purple anodized countersunk aluminum washers - High strength hardware
YOU WILL RECEIVE:
- One (1) 18 tooth 32 pitch (0.8 Mod) pinion gear - One (1) 56 tooth 32 pitch (0.8 Mod) spur gear - Three (3) mounting screws - Three (3) purple anodized countersunk washers - One (1) pinion adapter sleeve - Three (3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur backing plate)
SPECIFICATIONS:
- Number of Teeth: 18T/56T - Gear Pitch: 32 pitch (0.8 module) - Mounting Holes: 3 - Tooth Face width: ~5mm
COMMENTS:
- Consider using Hot Racing motor lock plate TE18L06 for secure motor mounting - Motor should no way exceed 180F. ESC should not exceed 160F. Excessive temperatures will shorten the life of the motor and ESC. SN July 19, 2017
